Renesas FP-128 Manual do Utilizador descarregar pdf (Página 13)

User system

Guide pins

4 projections to apply

epoxy resin adhesive to

Bottom view of IC soket

Pin 1

Figure 3 Location Setting of IC Socket

2.2.2 Soldering IC Socket

After fastening, solder the IC socket for an FP-128 package to the user system. Be sure to

completely solder the leads so that the solder slops gently over the leads and forms solder fillets.

(Use slightly more solder than the MCU.)

2.2.3 Inserting Cable Head

CAUTION

Check the location of pin 1 before inserting.

Align pin 1 on the IC socket for an FP-128 package on the user system with pin 1 on the user system

interface cable head, and insert the user system interface cable head into the IC socket on the user

system, as shown in figure 4.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

Renesas FP-128 Manual do Utilizador Página 13