Renesas M38000TL2-FPD Informações Técnicas descarregar pdf (Página 8)

( 6 / 14 )

(3) Connect the RESET cable (white) and the GND cable (black) of the emulation pod to pin RESET

(TP3) and pin Vss (TP2) of the M38K29T-ADF respectively. Leave the Vcc cable (yellow)

unconnected.

(4) Set the MCU type select switch of the M38000TL2-FPD to the RSS/RFS side.

(5) Connect an external power supply to pin Vcc (TP1) of the M38K29T-ADF. And connect the GND

output of the power supply to pin Vss (TP2). Use a power supply whose rising time is 10 ms or

less.

Table 4.1 lists the correspondence of the connector cables and signals, and Figure 4.2 shows

connecting the cables to the M38K29T-ADF.

Table 4.1 Connector cables of the M38000TL2-FPD and applicable signals

Cable color

White

Black

Yellow

Signal

RESET

Vss

No connection

Figure 4.2 Connecting the cables to the M38K29T-ADF

M38000TL2-FPD

RSS/RFS side

No connection

Black cable

White cable

Yellow cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Renesas M38000TL2-FPD Informações Técnicas Página 8