Renesas Emulation Pod M306H2T-RPD-E Informações Técnicas descarregar pdf (Página 24)

M306H5T3-RPD-E User’s Manual 2. Setup

REJ10J0866-0100Z Rev.1.00 Dec.16, 2004

Page 22 of 66

2.3 Selecting Clock Supply and Replacing Oscillator Circuit Boards

2.3.1 Clock Supply to the MCU

There are two ways to supply a clock to the MCU, using the oscillator circuit of the emulation pod or using the oscillator

circuit on the user system. Table 2.1 lists the factory-settings of each clock supply when you install the emulator debugger. The

clock supply can be set in the Init dialog box when starting up the emulator debugger or inputting CLK command on the script

window

Table 2.1 Clock Supply to the MCU

Clock Description Display of emulator debugger Default setting

Internal oscillator circuit of emulation pod

(OSC-3: 16.0 MHz or OSC-2)

Internal Yes

XIN-XOUT

User system External -

Internal oscillator circuit of emulation pod

(32.768 kHz)

Internal -

XCIN-XCOUT

User system External Yes

IMPORTANT

Note on Changing the Clock Supply:

 The clock supply can be set in the Init dialog box when starting up the emulator debugger or inputting

CLK command on the script window.

 For pins X

CIN

-X

COUT

, it is necessary to set the switches in the emulation pod. For details, refer to "2.4

Switch Settings" (page 27)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Sem comentários

Renesas Emulation Pod M306H2T-RPD-E Informações Técnicas Página 24