
Section 1 Specifications of the E8 Emulator
Table 1.1 shows the specifications of the M16C/62P and M16C/6N Groups E8 Emulator.
This manual describes the M16C/6N4, M16C/6N5, M16C/6NK, M16C/6NM, M16C/6NL, M16C/6NN groups as the M16C/6N
group.
Table 1.1 Specifications of the M16C/62P and M16C/6N Groups E8 Emulator
Target MCU M16C Family M16C/60 Series
M16C/62P and M16C/6N Groups
Usable operating mode Single-chip mode, Memory expansion mode
* Microprocessor mode is not supported.
Break function - Address match break, 8 points
- PC break (up to 255 points)
- Forcible break
Trace function Not available
Flash memory programming function Available
User interface Clock-synchronized serial (communicating via P64/P65/P66/P67)
MCU resource to be used - ROM size: 2 KB (alterable assigned address)
- RAM size: 128 bytes (alterable assigned address)
- Stack 14 bytes
- UART 1 function and P64/P65/P66/P67
- Pins P50 and P55
- Address match interrupt
Emulator power supply Unnecessary (USB bus powered, power supplied from the PC)
Interface with host machine USB (USB 1.1, full speed)
* Also connectable to host computers that support USB 2.0
Power supply function Can supply 3.3 V or 5.0 V to the target board (300mA, max)
M16C/62P 3.0--3.6V, 4.5--5.5V
M16C/6N4 (Normal-version)
M16C/6N5 (Normal-version)
M16C/6NK (Normal-version)
M16C/6NL
M16C/6NN
3.0--3.6V, 4.5--5.5V
Power voltage
M16C/6N4 (T-version, V-version)
M16C/6N5 (T-version, V-version)
M16C/6NK (T-version, V-version)
M16C/6NM (T-version, V-version)
4.5--5.5V
Table 1.2 shows the operating environment of the E8 Emulator.
Table 1.2 Operating Environment
Operating : 10°C to 35°C
Temperature
Storage : –10°C to 50°C
Operating : 35% RH to 80% RH, no condensation
Humidity
Storage : 35% RH to 80% RH, no condensation
Operating : 2.45 m/s
2
max.
Storage : 4.9 m/s
2
max.
Vibration
Transportation : 14.7 m/s
2
max.
Ambient gas No corrosive gas
1
Comentários a estes Manuais