Renesas HS6400FDIW3S Manual do Utilizador descarregar pdf (Página 45)

3.4.8 Generic Boot – Setup Complete

Having selected the Clock Mode, the Generic wizard completes as below.

Figure 3-18 Generic Boot setup complete

The Project Wizard will then continue through the remaining pages

3.4.9 Generic Boot – Device Settings

Please Refer to Section 3.3.4

3.4.10 Generic Boot - Connection Type

Please Refer to Section 3.3.5

3.4.11 Generic Boot – Programming Options

Please Refer to Section 3.3.6

3.4.12 Generic Boot – Reset Pin Settings [FDM connection only]

Please Refer to Section 3.3.8

3.4.13 Generic Boot – Reinterrogate on connect option

The ‘Programmer’ tab of the ‘Flash Properties’ dialog allows the user to configure whether FDT

should reinterrogate the Generic device on each connection. The default is set to ‘No’, so after a

connection has been established once, FDT re-uses the data collected from the initial inquiry

functions. If this option is changed to ‘Yes’, FDT will interrogate the device for the device details

each time it connects in Boot Mode. This means that one Generic Boot project will work with any

Generic Boot Device.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 93 94

Sem comentários

Renesas HS6400FDIW3S Manual do Utilizador Página 45