Renesas M3A-2152 Informações Técnicas descarregar pdf (Página 28)

Hardware Setup

M3A-2114 User’s Manual (26/68)

5. Hardware Setup

This chapter describes how to set up the hardware components necessary to use the Starter Kit.

Table 5.0-1 and Table 5.0-2 show how to set up the hardware components.

Table 5.0-1 Hardware Setup Procedure

When connected to the emulator When using the evaluation

board by itself

Setup Procedure

M3A-2114G52A/

G62A/ G72A

M3A-2114G52/

G62/ G72

M3A-2114G52A/ G62A/G72A,

M3A-2114G52/ G62/ G72

Set the emulator. 1st (Refer to 5.1.1) 1st (Refer to 5.2.1) -

Connect the host PC and emulator. 2nd (Refer to 5.1.1) 2nd (Refer to 5.2.2) -

Set the evaluation board. 3rd (Refer to 5.1.2) 3rd (Refer to 5.2.3) 1st (Refer to 5.3.1)

Connect the evaluation board and

emulator.

4th (Refer to 5.1.3) 4th (Refer to 5.2.4) -

Turn on the emulator. 5th (Refer to 5.1.4) 5th (Refer to 5.2.5) -

Turn on the evaluation board. 6th (Refer to 5.1.4) 6th (Refer to 5.2.5) 2nd (Refer to 5.3.2)

Table 5.0-2 Hardware power OFF Procedure

Setup Procedure When connected to the emulator When using the evaluation

board by itself

Turn off the evaluation board. 1st

(Refer to 5.1.4) 1st (Refer to 5.3.2)

Turn off the emulator. 2nd (Refer to 5.1.4) -

5.1 Hardware Setup when M3A-2114G52A/ G62A/ G72A in use

5.1.1 M32100T-EZ-E Power Supply and Settings

The following shows how to set M32100T-EZ-E.

For more details, refer to M32100T-EZ-E User’s Manual.

M32100T-EZ-E is supplied power from the host PC via USB cable, and it turns ON by connecting included USB

cable.

The method for connecting them is shown in Figure 5.1-1

Figure 5.1-1 Feeding Power to M32100T-EZ-E

USB cable

M32100T-EZ-E

USB I/F

Connect to the host

PC’s USB port

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 69 70

Sem comentários

Renesas M3A-2152 Informações Técnicas Página 28