Renesas FLASH Development Toolkit 3.07 Manual do Utilizador descarregar pdf (Página 25)

CellCom/FreeSpeak Firmware Update Procedures

Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 25 of 49

Note: a license agreement will need to be accepted before download. The download

is large (approx 1Gb).

5.2.1 Steps to upgrade the Xilinx FPGA using v2.0

- Connect the Basestation and PC via Ethernet

- Open the Configuration Editor software

- 

- Enter the Basestation IP address

- Find the *.XSVF file to be applied (this can be found on the

Release CD)

- As soon as you click Open, the download will start and a

progress bar will display

- Once the download is complete, the progress bar will say

Done and the Basestation will restart automatically, running

the new Xilinx software

5.2.2 Steps to upgrade the Xilinx FPGA using the iMPACT software

- Remove the case lid from the basestation. WARNING –

EXPOSED VOLTAGES

- Connect the USB connector of the download cable to the

Computer USB port. Connect the 14way IDC header into

CON12 of the basestation unit

- Start the iMPACT programming tool

- 

- 

-          

. If the cable is correctly connected, the chip chain will

be displayed. The chain should appear to contain 2 devices

- The selected devices are displayed as green in the program.



- On the second device, select the file image that is to be used,



CellCom/FreeSpeak release CD)

-          

the drop down list.     

should be selected

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 48 49

Sem comentários

Renesas FLASH Development Toolkit 3.07 Manual do Utilizador Página 25