Renesas FP-144L Informações Técnicas descarregar pdf (Página 35)

8. When you use the emulator without connecting it to the user system, ensure that the SW1

jumper pin is inserted to [USER-OFF]. While no pin or SW1 jumper pin is inserted to

[USER-OFF], the emulator supplies 3.3-V power to DrVCC, which is the power supply

exclusively used for USB.

9. To connect the emulator to the user system, ensure that the SW1 jumper pin is inserted to

[USER-ON]. While SW1 jumper pin is inserted to [USER-ON], the emulator does not supply

power to DrVCC, which is the power supply exclusively used for USB. Thus the power must

be supplied from the user system instead.

10. Do not connect a 5-V signal to any pin, including the USB pins. Incorrect usage will cause

damage to the emulator product, user system interface board, and user system.

1 2 ... 30 31 32 33 34 35 36 37 38 39

Sem comentários

Renesas FP-144L Informações Técnicas Página 35