Renesas TFP-100G Informações Técnicas descarregar pdf (Página 23)

2.2.4 Fastening Cable Head

CAUTION

1. Use a screwdriver whose head matches the screw head.

2. The tightening torque must be 0.054 N•m or less.

If the applied torque cannot be accurately measured,

stop tightening when the force required to turn the screw

becomes significantly greater than that needed when first

tightening. If a screw is tightened too much, the screw

head may break or an IC socket contact error may be

caused by a crack in the IC socket solder.

3. If the emulator does not operate correctly, cracks might

have occurred in the solder. Check conduction with

a tester and re-solder the IC socket if necessary.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Sem comentários

Renesas TFP-100G Informações Técnicas Página 23