Renesas SH7781 Informações Técnicas descarregar pdf (Página 27)

Section 3 Preparing to Connect the Trace Unit

Rev. 2.00 Jan. 28, 2008 Page 19 of 32

REJ10J1422-0200

Section 3 Preparing to Connect the Trace Unit

3.1 Connecting the E200F Trace Unit with the User System

To use the external bus trace function in the emulator, the emulator and the user system must be

connected via the external bus trace unit (R0E0200F0ETU00). Install the trace unit connector on

the user system for connection of the trace unit, referring to section 3.2, Installing the Trace Unit

Connector, in this manual. When designing the user system, read the SH-4A, SH4AL-DSP E200F

Emulator User's Manual and hardware manual for the related MPU.

3.2 Installing the Trace Unit Connector

3.2.1 Trace Unit Connector Installed on the User System

Table 3.1 shows the recommended trace unit connector.

Table 3.1 Recommended Connector

Type Number Manufacturer Specification

QTH-090-04-L-D-A Samtec, Inc. QTH series, 0.5-mm pitch, 180 pins

Note: To connect the connector on the trace unit, do not place any components within 6 mm of

the trace unit connector.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Sem comentários

Renesas SH7781 Informações Técnicas Página 27