Renesas M32R-FPU Manual do Utilizador descarregar pdf (Página 20)

M32R Debugger and Trace 20 Trace specific Commands

Trace specific Commands

SYStem.Option BTM Enables program trace messages

Default: ON.

The option can be switched when the chip has trace support. When BTM is ON, the chip delivers program

trace messages.

SYStem.Option DTM Enables data trace messages

Default: OFF.

The option can be used if the chip has trace support. When the option is set to READ|WRITE|READWRITE,

the CPU generates data trace messages, according to the selected access type.

SYStem.Option STALL Trace message overrun control

Default: OFF.

The option can be set when the chip has trace support and defines the behavior that becomes active when

the chip intern trace message FIFO buffer gets full. Stall OFF will cause losing of messages when the buffer

overruns.

Format: SYStem.Option BTM [ON | OFF]

Format: SYStem.Option DTM [OFF | Read | Write | ReadWrite]

Format: SYStem.Option STALL [ON | OFF]

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Sem comentários

Renesas M32R-FPU Manual do Utilizador Página 20