Renesas H8S/2338 Series Manual do Utilizador descarregar pdf (Página 11)

Simulator for H8/300, H8/300H and H8S 11 Specific SYStem Commands

SYStem.Option Advanced Advanced addressing mode

Defines the address mode of the CPU.

SYStem.Option EXR EXR mode setting

TBD

SYStem.Option IMASKASM Disable interrupts while single stepping

Default: OFF.

If enabled, the interrupt mask bits of the CPU will be set during assembler single-step operations. The

interrupt routine is not executed during single-step operations. After single step the interrupt mask bits are

restored to the value before the step.

Format: SYStem.Option Advanced [off | on]

off Normal address mode (64K).

on Advanced address mode (16M).

Format: SYStem.Option EXR [ON | OFF]

Format: SYStem.Option IMASKASM [ON | OFF]

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Sem comentários

Renesas H8S/2338 Series Manual do Utilizador Página 11