Renesas H8S/2668 Series Informações Técnicas descarregar pdf (Página 31)

Section 5 Diagnostic Test Procedure

This section describes the diagnostic test procedure using the E6000 test program.

5.1 System Set-Up for Test Program Execution

To execute the test program, use the following hardware; do not connect the user system interface

cable and user system.

•

E6000 (HS2678REPI61H)

•

Host computer

•

The E6000 PC interface board which will be one of the following boards or card:

Select one interface board from the following depending on the PC interface specifications.

ISA bus interface board (HS6000EII01H)

PCI bus interface board (HS6000EIC01H or HS6000EIC02H)

PCMCIA interface card (HS6000EIP01H)

LAN adapter (HS6000ELN01H)

1. Install the E6000 PC interface board in the host computer and connect the supplied PC

interface cable to the board.

2. Connect the PC interface cable to the E6000.

3. Connect the supplied AC adapter to the E6000.

4. Initiate the host computer to make it enter DOS prompt command input wait state.

5. Turn on the E6000 switch.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Sem comentários

Renesas H8S/2668 Series Informações Técnicas Página 31