Renesas Emulator System E8 Informações Técnicas descarregar pdf (Página 17)

4. Connect Vss and Vcc with the Vss and Vcc of the MCU, respectively (within the

guaranteed range of the microcomputer).

When the power-supply mode is used, the power is supplied to the user system. Check

that the power consumption or voltage of the user system is within the available range

of E8/E8a and avoid a problem such as closing of the power-supply circuit.

5. Connect nothing with N.C.

WARNING

In the power-supply mode, connect the emulator after

checking that the power-supply circuit on the user system is

not closed or the pin number assignments of the user system

connector is correct.

Failure to do so will result in a FIRE HAZARD and will

damage the host computer, the emulator, and the user

system.

6. Figures 4.5 and 4.6 show the interface circuit in the E8 and E8a emulators,

respectively. Use these figures as references when determining the pull-up resistance

value.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Sem comentários

Renesas Emulator System E8 Informações Técnicas Página 17