Renesas Emulator System E8 Informações Técnicas descarregar pdf (Página 22)

To keep the [Emulator Setting] dialog box closed next time the emulator is started, check "Do

not show this dialog box again." at the bottom of the [Emulator Setting] dialog box. You can

open the [Emulator Setting] dialog box using either one of the following methods:

⎯ After the emulator gets started, select Menu - [Setup] -> [Emulator] -> [Emulator

Setting...].

⎯ Start the emulator while holding down the Ctrl key.

⎯ After the emulator gets started and an error occurred, restart the emulator.

When you check "Do not show this dialog box again.", the emulator doesn't supply power to

the user system. To use this check box, start the emulator after turning on the power.

2. Emulator Mode

The selection of the device, the specification of the mode, and the setting of the power supply

are done in the [Emulator mode] page of the [Emulator Setting] dialog box.

⎯ Device

Select the device name in use from the [Device] combo box. The following items are

selected in the [Mode] group box.

⎯ Modes

• Erase Flash and Connect

This mode is used when there is no emulator program in the flash memory of the target

device. In this mode, data of the flash memory of the target device is erased when the

emulator is activated. Select this item when the emulator is firstly activated, the version

of the emulator’s software is updated, or the ID code is changed.

• Keep Flash and Connect

This mode is used when there is an emulator program in the flash memory of the target

device. Enter the ID code specified above (‘Erase Flash and Connect’). If an incorrect

code is entered, all the programs on the flash memory will be erased.

Note: When the emulator gets started in this mode after selecting "Do not show this dialog box

again.", the initial values of the ID code are ‘00E8’ and ‘0E8a’, respectively, for the E8

and E8a emulators. If you use the ID code other than the initial value, do not use "Do not

show this dialog box again.".

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

Sem comentários

Renesas Emulator System E8 Informações Técnicas Página 22