Renesas Emulator System E8 Informações Técnicas descarregar pdf (Página 28)

Items that can be displayed in this dialog box are listed below.

[Device] combo box Displays the MCU name.

[Emulation mode] combo box Selects the emulation mode at user program execution.

Select Normal to perform normal emulation.

Select No break to disable PC breakpoint or break condition

settings during emulation.

[Step option] combo box Sets the step interrupt option.

Disable interrupts during single step execution: Disables

interrupts

during step execution.

Enable interrupts during single step execution: Enables

interrupts

during step execution.

[User interface clock] combo

box

Displays the transfer clock of the user interface.

[Flash memory synchronization]

combo box

Selects whether or not the contents of the flash memory are

acquired by the emulator when the user program is stopped or

the position where the PC break is set is put back as the

original code.

When the flash memory is not programmed by the user

program, its contents need not be acquired by the emulator.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Sem comentários

Renesas Emulator System E8 Informações Técnicas Página 28