
369
8.2.6 HCAN
When the CPU accesses the HCAN register and the operating frequency is 20 MHz or lower, the access counts
are the same as those of the MCU. However, when the operating frequency is higher than 20 MHz, one more
clock cycle is required for the CPU’s access counts.
8.2.7 Procedure for Applying the Power
When the user system is connected to the emulator, apply the power of the user system and then start the
emulator. However, depending on the user system, the emulator may not operate normally due to the leakage
current. In such cases, turn off the power switch of the emulator with the user system on, and restart the
emulator.
Comentários a estes Manuais