Renesas SH7641 Informações Técnicas descarregar pdf (Página 35)

User system interface cable

H-UDI port

connector

User system GND

connection

User system

GND line

Tab

Pin 1

Pin 8

Figure 2.4 Connecting the User System Interface Cable to the User System

when the 14-pin Straight Type Connector is Used

Notes: 1. To connect the signals output from the H-UDI port connector, refer to the

device pin alignment.

2. To remove the user system interface cable from the user system, pull the tab

on the connector upward.

3. The range of frequencies that the H-UDI operates at is different according to

the devices used. For details, refer to section 6.5.4, Notes on Using the JTAG

Clock (TCK) and AUD Clock (AUDCK).

4. Connect the H-UDI signals from the H-UDI port connector directly to the

device.

5. When developing user systems, do not connect the TDI and TDO signals of the

device to the boundary scan loop, or separate them by using a switch (figure

2.5).

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 249 250

Sem comentários

Renesas SH7641 Informações Técnicas Página 35