Renesas SH7641 Informações Técnicas descarregar pdf (Página 51)

3.4 Setting up the Emulator

The clocks which are used for data communications must be set up on the emulator before the

program is downloaded.

• AUD clock

A clock used in acquiring AUD traces.

If its frequency is set too low, complete data may not be acquired during realtime tracing.

If the frequency is set too high, the upper limit for the device’s AUD clock may be exceeded.

The AUD clock is only needed for emulators that have an AUD trace function.

• JTAG clock (TCK)

A communication clock for downloading data to the emulator except for acquiring AUD trace.

If its frequency is set too low, the speed of downloading will be lowered.

If its frequency is set too high, the upper limit for the device’s TCK clock may be exceeded.

For details of the limitations on both clocks, refer to section 6.5.4, Notes on Using the JTAG

Clock (TCK) and AUD Clock (AUDCK). The following is a description of the procedure used to

set the clocks.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 249 250

Sem comentários

Renesas SH7641 Informações Técnicas Página 51